Large air volume, low resistance, low moisture absorbing and the operating temperature is up to 300 degree centigrade.
|
Matériel de support : |
Fibre de verre |
|
Matériau du cadre : |
Aluminum /Stainless steel |
|
Efficacité : |
85%@2.0μm |
|
Option aluminium Épaisseur (mm) : |
17/21/25/46/50/69/90/96 |
|
Température maximale de fonctionnement : |
300 degree centigrade |
|
Humidité maximale de fonctionnement : |
100% |
The High Heat-Resistance Pleated Filter is designed to withstand high temperatures while effectively filtering air. Its unique pleated design provides a larger surface area for efficient filtration and extended filter life. This filter is commonly used in industrial settings, such as manufacturing plants and processing facilities, where high temperatures are present. It effectively captures and removes airborne particles, including dust, pollen, and contaminants, ensuring cleaner air and a healthier environment.
High temperature filters use the double-sided filter media which is folded by galvanize wire mesh or stainless steel mesh, and has good strength., as a result of this, the media material is not easily to be blown broken.These filters are made of special components which can ensure the filters to retain their form and function well at extreme high temperatures.They are widely used in high fire requirements and high temperature environment ventilation system end filter.
1. The filter material is folded on both sides with galvanized wire mesh or stainless steel mesh. It has good strength and the filter material is not easily blown apart.
2. The filter material is reinforced with galvanized square mesh, galvanized scallop mesh, galvanized iron wire and stainless steel wire on both sides, and can be used normally in a large air volume environment.
3. The filter material has a large filter area, long service life, large air volume, low initial resistance, and is non-flammable. Applicable places: used for general primary filter, hot air high-temperature oven air filtration and high-temperature oven air filtration in coating plants.
It is mainly made of high-performance high-temperature resistant ultra-fine glass fiber filter paper as the filter medium, aluminum foil corrugated sheet as the spacer, SUS304 stainless steel plate as the frame, and sealed and assembled with high-temperature resistant sealan.
| Modèle NO | Dimensions totales (mm) (WxHxD) |
Débit d'air nominal/ résistance initiale (m³/h)/(pa) |
Vitesse du vent (m/s) | Surface du filtre (m²) | Efficacité de la filtration |
| B51-001 | 287*592*10 | 1560/20 | 2.55 | 0.34 | G1 |
| B51-002 | 592*592*10 | 3200/20 | 2.55 | 0.7 | G1 |
| B51-003 | 287*592*15 | 1560/20 | 2.55 | 0.51 | G1 |
| B51-004 | 592*592*15 | 3200/20 | 2.55 | 1.05 | G1 |
| B51-005 | 287*592*21 | 1560/20 | 2.55 | 0.51 | G1 |
| B51-006 | 592*592*21 | 3200/20 | 2.55 | 1.05 | G1 |
Beside the below standard sizes, it can be customized any size
1. Cadre extérieur en acier inoxydable de 1,5 à 2,00 mm. La conception unique du cadre augmente la résistance globale.
2. La feuille d'aluminium de 0,03 mm qui sépare l'arc de la rainure ondulée peut non seulement protéger le papier filtre contre les dommages, mais aussi réduire la résistance et la vitesse du vent pour passer uniformément.
3. Glass fiber filter material, high temperature resistant special rubber sealing pad.
It can be used in general primary filtration, hot air type high temperature oven air filtration and coating factory high temperature oven air filter.
Si vous êtes intéressé par nos produits et souhaitez en savoir plus, veuillez laisser un message ici, nous vous répondrons dès que possible.
