Tiene las ventajas de gran capacidad de retención de polvo, gran volumen de aire, pequeña resistencia y puede limpiarse repetidamente.
|
Material multimedia : |
Fibra de vidrio |
|
Material del marco : |
Aluminio /Acero galvanizado |
|
Eficiencia: |
45%~95%@0.5μm |
|
Opción aluminioespesor(mm) : |
21/25 |
|
Temperatura máxima de funcionamiento : |
50 grados centígrados |
|
Humedad máxima de funcionamiento : |
100% |
The ultra-fine glass fiber filter material of JM Company in the United States is used. This filter material is divided into four levels: A, B, C, and D. The air volume, resistance, and dust holding capacity of glass fiber bag medium efficiency filter products made of different levels of materials are different. Glass fiber bags are widely used in industrial plant HVAC air inlet filtration. In the European and American markets, glass fiber bag medium efficiency filters are the filter materials of electronic factories (especially chip factories and LCD\plasma panel factories), pharmaceutical factories, automobile spray workshops and factories. Glass fiber filter materials with polyester non-woven fabric backing (B2) can withstand high temperatures of 120 degrees Celsius. Glass fiber filter materials with glass fiber mesh cloth backing (B1) can withstand higher temperatures.
1. Estructura simple, amplia aplicación y rentable.
2. Buen rendimiento ignífugo y cumple la norma UL-2.
3. Baja resistencia.
4. El material especial de la fibra y la estructura razonable hacen el filtro de bolso con velocidad del viento máxima.
5. Large dust capacity
Compared with chemical fiber bag medium efficiency filter, glass fiber bag medium efficiency filter has the following advantages:
a. Stable filtration efficiency, while chemical fiber filter material may produce a sudden drop in efficiency due to static attenuation
b. The pressure drop rises slowly, and the service life is at least 1 times longer than that of chemical fiber filter material (Note: laboratory test results)
c. The working temperature can reach 110-120 degrees Celsius, and the fire rating reaches UL-1 (polyester non-woven fabric backing) and UL-2 (glass fiber mesh cloth backing). Chemical fiber filter material is a flammable and combustion-supporting material.
d. Unlike chemical fiber filter material with static electricity, the dust particles passing through the glass fiber filter material will not carry static electricity and will not increase the chance of damaging microelectronic products. Chemical fiber filter material will cause the entire clean room space to carry static electricity.
e. The filter material fiber adopts a special component formula, which can be quickly dissolved in the human lung fluid and excreted from the body, and will not stay in the human body for a long time like chemical fiber
f. Although the procurement cost of chemical fiber filter material is low. However, because it saves labor, saves electricity consumed by upstream air volume, and improves customer product yield, glass fiber filter materials have lower life cycle costs.
| Modelo | Dimensiones totales (mm)(An*Al*F) | Resistencia inicial del caudal de aire nominal (m³/h)(pa) | Número de bolsas | Superficie filtrante (㎡) | Diferente volumen de aire/resistencia (m³/h)(pa) | Resistencia final recomendada(pa) | Eficacia de filtración En779 | |
| BP9-001 | 592*592*381 | 2050/55 | 6 | 3.18 | 1500/40 | 2500/65 | 150 | F5 |
| BP9-002 | 592*592*381 | 2050/70 | 6 | 3.18 | 1500/50 | 2500/85 | 200 | F6 |
| BP9-003 | 592*592*381 | 2050/100 | 6 | 3.18 | 1500/75 | 2500/120 | 300 | F7 |
| BP9-004 | 592*592*381 | 2050/120 | 6 | 3.18 | 1500/85 | 2500/145 | 350 | F8 |
| BP9-005 | 592*592*381 | 2050/140 | 6 | 3.18 | 1500/100 | 2500/170 | 400 | F9 |
| BP9-006 | 592*592*500 | 3500/55 | 8 | 5.37 | 2500/40 | 4500/70 | 300 | F5 |
| BP9-007 | 592*592*500 | 3500/70 | 8 | 5.37 | 2500/50 | 4500/90 | 350 | F6 |
| BP9-008 | 592*592*500 | 3500/100 | 8 | 5.37 | 2500/70 | 4500/130 | 120 | F7 |
| BP9-009 | 592*592*500 | 3500/120 | 8 | 5.37 | 2500/85 | 4500/155 | 150 | F8 |
| BP9-010 | 592*592*500 | 3500/140 | 8 | 5.37 | 2500/100 | 4500/180 | 150 | F9 |
| BP9-011 | 592*592*600 | 5100/55 | 10 | 7.87 | 4000/45 | 6000/65 | 200 | F5 |
| BP9-012 | 592*592*600 | 5100/70 | 10 | 7.87 | 4000/55 | 6000/82 | 250 | F6 |
| BP9-013 | 592*592*600 | 5100/100 | 10 | 7.87 | 4000/80 | 6000/118 | 300 | F7 |
| BP9-014 | 592*592*600 | 5100/120 | 10 | 7.87 | 4000/95 | 6000/140 | 350 | F8 |
Además de los siguientes tamaños estándar, se puede personalizar cualquier tamaño y eficiencia (F5, F6, F7,F8, F9) si lo necesita.
Maximum temperature: ≤90℃
Maximum humidity: ≤100%RH
Se utiliza principalmente para la filtración intermedia de los sistemas de ventilación de aire acondicionado central, farmacéutica, bio-farmacéutica, maquinaria, hospital, electrónica, semiconductores, alimentos y otros purificación industrial.
Si está interesado en nuestros productos y desea conocer más detalles, por favor deje un mensaje aquí, le responderemos tan pronto como podamos.
