Various daily physical disinfection methods for transfer windows and their corresponding applicable scenarios
\nI. UV-C ultraviolet radiation (most common, suitable for all scenarios)
\nApplicable scenarios
\nElectronic dust-free workshops (class 10,000, 100,000 clean rooms)
\nDaily material transfer in chip, lithium battery, optical, food packaging workshops, semi-finished product transportation of plastic, metal, paper box, daily disinfection standard.
\nGeneral medical device clean workshops (non-sterile)
\nTransportation of components, packaging consumables, testing tools, daily sterilization, reducing surface microbial load.
\nGeneral hospital clean operating rooms, laboratories, pharmacies
\nTransfer of equipment, consumables, test samples, rapid short-time disinfection.
\nDaily transfer pre-treatment in sterile workshops
\nAs a basic disinfection, combined with wiping, and then regularly do VHP deep fumigation.
\nGeneral sample transfer in biological laboratories (non-positive bacteria \/ high pathogenic areas)
\nRegular disinfection of samples, consumables.
\nInapplicable scenarios
\nSevere material stacking obstruction, multi-pore materials cannot be completely sterilized by UV alone; High-level sterile areas cannot be solely sterilized by UV.
\nII. laminar flow FFU self-cleaning blow (exclusive physical disinfection for laminar transfer windows)
\nApplicable scenarios
\nHigh-level electronic clean workshops (class 10,000, 100,000)
\nExtremely strict dust particle control, not only sterilization, but also removal of floating dust and floating bacteria to prevent external particles from entering the clean area.
\nPrecision optics, semiconductor, laboratory testing rooms
\nMicroscopic dust can cause product defects, laminar blow first purifies the air, then combined with UV.
\nSterile raw materials, implantable medical devices clean area
\nBalancing dust control and bacterial control, dual physical protection.
\nFor laboratories sensitive to aerosols and floating dust
\nReduce box internal floating microorganisms, reduce pollution diffusion risk.
\nInapplicable scenarios
\nOnly for simple material transfer, low-clean-level ordinary workshops, no additional laminar function required.
\nIII. Dry dust-free wiping \/ Clean compressed air blow (preliminary physical dust removal)
\nApplicable scenarios
\nWorkshops with large amounts of dust on the outer packaging
\nPre-treatment of plastic, metal, paper box raw materials, outer packaging materials before entering the clean area, blow away floating dust, reduce subsequent disinfection pressure.
\nHigh-dust processing supporting clean rooms
\nTransportation of workpieces after grinding, injection molding, machining, dust is abundant, first physical dust removal then enter the transfer window.
\nDaily cleaning of all clean areas in each shift
\nDry wipe the inside of the box after each shift to remove dust, ensure no obstruction for UV irradiation.
\nInapplicable scenarios
\nWorkshops with oil stains, sticky contaminants, simple dry blowing cannot remove them, must be combined with chemical disinfectant wiping.
\nIV. Dry heat high-temperature disinfection (rarely used in daily life, only for niche scenarios)
\nApplicable scenarios
\nOnly for all-metal heat-resistant workwear, stainless steel molds dedicated transfer windows
\nWithout plastic, silicone accessories, specifically transporting heat-resistant metal appliances.
\nHeat-resistant glass instrument dedicated laboratory transfer windows
\nInapplicable scenarios
\nMost conventional transfer windows (including rubber sealing strips, plastic accessories, UV lamps), high temperature will accelerate the aging and damage of sealing components, prohibited from frequent daily use.
\nV. Ozone ionization disinfection (deep physical disinfection, not every daily routine)
\nApplicable scenarios
\nLow-budget general clean workshops, food workshops for deep disinfection weekly
\nSterilization of emergency chambers after temporary contamination
\nEmergency cavity sterilization after temporary contamination
\nDeep treatment after material leakage\uff0c obvious box contamination.
\nInapplicable scenarios
\nGMP workshops for sterile pharmaceuticals\uff0c implantable medical devices (ozone corrodes rubber strips\uff0c residues\uff0c not recommended for long-term use)\uff1b
\nDaily continuous use\uff1b
\nHigh-end transfer windows with silicone\uff0c rubber sealing components inside.
\nProvide a set of standard physical disinfection matching plan according to workshop type
\n100\uff0c000 \/ 10\uff0c000 electronic factory (general)
\nDry dust-free wiping + UV irradiation 15 minutes
\nClass 10\uff0c000 \/ 100\uff0c000 precision electronics
\nClean air blow pre-treatment + laminar self-cleaning blow + UV
\nFood\uff0c ordinary packaging clean rooms Dry wiping for dust removal + UV; once a week, deep ozone disinfection
\nSterile medical devices \/ pharmaceutical workshop
\nDry dust removal wiping + UV for 30 minutes (daily); monthly VHP fumigation instead of ozone
\nHospital laboratory, general clean area
\nDust-free cloth dry wiping + short-term UV disinfection
\nBiological safety laboratory (for routine samples)
\nSuction dust removal + laminar flow self-cleaning + UV; for high-risk samples, chemical auxiliary disinfection is added<\/p>","protected":false},"excerpt":{"rendered":"
Various daily physical disinfection methods for transfer windows and their corresponding applicable scenarios I. UV-C ultraviolet radiation (most common, suitable for all scenarios) Applicable scenarios Electronic dust-free workshops (class 10,000, 100,000 clean rooms) Daily material transfer in chip, lithium battery, optical, food packaging workshops, semi-finished product transportation of plastic, metal, paper box, daily disinfection standard. […]<\/p>","protected":false},"author":12,"featured_media":4978,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[92],"tags":[],"class_list":["post-5572","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-technology"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts\/5572","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/comments?post=5572"}],"version-history":[{"count":1,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts\/5572\/revisions"}],"predecessor-version":[{"id":5573,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts\/5572\/revisions\/5573"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/media\/4978"}],"wp:attachment":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/media?parent=5572"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/categories?post=5572"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/tags?post=5572"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}