Main structure installation steps of the clean room (general standard version)
\nI. Preparations
\nSite cleaning: The ground should be clean, free of debris and water accumulation.
\nLaying out and positioning:
\nUse a tachymeter \/ laser level to mark the positions of the columns.
\nDetermine the length and width of the clean room, the direction of entry and exit, and the layout of the FFU.
\nMaterial inspection:
\nAll the materials, such as profiles, angle pieces, screws, anchor bolts, and expansion bolts, should be complete and undamaged.
\nII. Formal installation steps
\n1. Install the anchor base
\nDrill holes at the marked points of the columns \u2192 Insert expansion bolts \u2192 Fix the anchor base.
\nLevel the base to ensure that all bases are of the same height and level.
\n2. Assemble the bottom frame
\nConnect the bottom cross and longitudinal aluminum profiles with angle pieces.
\nPlace it on the anchor base, initially lock it, do not tighten it completely, to facilitate subsequent adjustments.
\nUse a laser level to check:
\nSquare (equal diagonals)
\nLevel (uniform height around)
\n3. Install the columns
\nConnect the columns with the corner pieces of the bottom frame, stand them vertically.
\nCheck the verticality with a level, deviation \u2264 2mm\/m.
\nFully tighten the screws of the columns and the bottom frame.
\n4. Install the top frame
\nInstall the top beams and cross beams to form a rectangular top frame.
\nCheck:
\nSquare (top)
\nOverall vertical without inclination
\nConfirm that there are no errors, then fully tighten all the angle pieces and screws.
\n5. Reinforcement and leveling
\nAfter the overall frame is completed, recheck:
\nLevel
\nVertical
\nSquare
\nUse leveling spacers to fine-tune if there are deviations.
\nFinally, tighten all the anchor bolts of the expansion screws.
\n6. Install the top FFU \/ blind plate keel (if any)
\nInstall the FFU cross beams on the top frame.
\nArrange the spacing according to the FFU size to ensure uniform load-bearing.
\n7. Install the enclosure structure (sides)
\nInstall according to the material you choose:
\nPVC curtain: Install the hanging rail \u2192 Hang the curtain \u2192 Adjust the height.
\nAcrylic \/ PC board: Fix with angle aluminum strips \u2192 Seal with glue.
\nTempered glass \/ color steel plate: Seal with glue \u2192 Fix the strips \u2192 Seal the edges.
\n8. Sealing and cleanliness treatment
\nApply neutral clean sealant to all the joints of the columns, cross beams, and the ground.
\nRemove burrs and sharp corners to avoid dust accumulation.
\nClean the site to ensure no dust or waste.
\nIII. Key points for installation completion and acceptance
\nThe frame is firmly installed without shaking.
\nThe levelness, verticality, and squareness meet the standards.
\nAll screws are fully tightened without loosening.
\nThe sealant is continuous, without bubbles or cracks.
\nThe overall does not produce dust and is easy to clean, meeting the requirements of the clean area.<\/p>","protected":false},"excerpt":{"rendered":"
Main structure installation steps of the clean room (general standard version) I. Preparations Site cleaning: The ground should be clean, free of debris and water accumulation. Laying out and positioning: Use a tachymeter \/ laser level to mark the positions of the columns. Determine the length and width of the clean room, the direction of […]<\/p>","protected":false},"author":3,"featured_media":4933,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[92],"tags":[],"class_list":["post-5310","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-technology"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts\/5310","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/comments?post=5310"}],"version-history":[{"count":1,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts\/5310\/revisions"}],"predecessor-version":[{"id":5311,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/posts\/5310\/revisions\/5311"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/media\/4933"}],"wp:attachment":[{"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/media?parent=5310"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/categories?post=5310"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bacintl.com\/es\/wp-json\/wp\/v2\/tags?post=5310"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}