{"id":5292,"date":"2026-04-11T14:43:35","date_gmt":"2026-04-11T06:43:35","guid":{"rendered":"https:\/\/www.bacintl.com\/?p=5292"},"modified":"2026-04-11T08:35:47","modified_gmt":"2026-04-11T00:35:47","slug":"what-are-the-specific-details-that-need-to-be-particularly-noted-when-installing-the-high-efficiency-filter-for-the-automatic-double-door-cargo-shower-room","status":"publish","type":"post","link":"https:\/\/www.bacintl.com\/ar\/what-are-the-specific-details-that-need-to-be-particularly-noted-when-installing-the-high-efficiency-filter-for-the-automatic-double-door-cargo-shower-room\/","title":{"rendered":"What are the specific details that need to be particularly noted when installing the high-efficiency filter for the automatic double-door cargo shower room?"},"content":{"rendered":"<p>Below is a detailed list of the most crucial, easily overlooked, and directly affecting the lifespan and cleaning efficiency aspects when installing an efficient filter in a manual double-door or shower room, specifically for this purpose. It is practical and can be directly followed:<br \/>\n1. Pre-installation precautions<br \/>\nMake sure the direction is absolutely correct and the filter cannot be installed backwards.<br \/>\nThe efficient filter has arrow markings, and the arrow must be in the same direction as the airflow (in a shower room, it usually blows from the outside to the inside).<br \/>\nInstalling it backwards will result in high resistance, easy clogging, sealing failure, and a halved lifespan.<br \/>\nClean the installation frame and box<br \/>\nBefore installation, wipe the static pressure box, installation slot, and sealing strip position with a dust-free cloth. There should be no dust or debris.<br \/>\nDust can cause poor sealing and air leakage.<br \/>\nDo not touch or squeeze the filter paper with your hands.<br \/>\nFinger oil and sweat can damage the filter paper structure, causing local blockage or leakage.<br \/>\nOnly grasp the metal frame when moving, do not pinch the filter paper.<br \/>\n2. Sealing section (most critical)<br \/>\nThe sealing strip must be complete, without fractures, and not flattened.<br \/>\nThe sealing strip interface should be 45\u00b0 aligned, not simply connected, otherwise the corner area will leak.<br \/>\nThe compression of the sealing strip should be controlled at about 1\/3, too loose will cause air leakage, and too tight will easily age and fail.<br \/>\nThe four corners are the leakage hotspots.<br \/>\nDuring installation, carefully check the four corners, the sealing strip should not curl or be misaligned.<br \/>\nIf necessary, apply a small amount of neutral sealant at the corners to assist in sealing.<br \/>\nDo not forcefully press or lever the installation.<br \/>\nForcing will result in:<br \/>\nFrame deformation<br \/>\nFilter paper cracking<br \/>\nLocal loss of elasticity of the sealing strip<br \/>\nPush gently to the correct position, evenly distribute the force.<br \/>\n3. Installation process details<br \/>\nMultiple people cooperate, maintain levelness<br \/>\nThe efficient filter in a shower room has a large size, single-person installation is prone to tilting, resulting in one side being tight while the other is loose.<br \/>\nPlace it horizontally, with uniform gaps around.<br \/>\nThe pressing method should be uniform.<br \/>\nWhen using a pressure strip or screw to fix, gradually tighten diagonally, do not lock single-sided at once.<br \/>\nAvoid excessive force causing deformation of the frame.<br \/>\nEnsure complete adhesion to the static pressure box.<br \/>\nThere should be no gaps or suspensions between the filter and the box.<br \/>\nGaps will form vortices, causing local dust accumulation and abnormal pressure differences.<br \/>\n4. Post-installation inspection<br \/>\nManual inspection of sealing performance<br \/>\nFeel along the edge of the box with your hand, check for any air leakage or gaps.<br \/>\nClose the shower door, turn on the fan, use a paper strip or hand to test for any obvious air overflow.<br \/>\nRecord the initial pressure difference<br \/>\nAfter installation, start the machine for 5 minutes, record the pressure difference table value, as a basis for subsequent replacement.<br \/>\nIt is recommended to immediately conduct a completeness leak detection.<br \/>\nAfter a new efficient installation, leak detection must be performed to avoid leakage immediately after installation due to installation issues.<br \/>\n5. Special points for automatic double-door shower rooms<br \/>\nDoor body vibration is large<br \/>\nFilter fixation must be firm, the pressure strip screws must not be loose, otherwise long-term vibration will cause loosening and air leakage.<br \/>\nHigh air volume and strong impact<br \/>\nThe quality of the sealing strip must be good to avoid the sealing strip being deformed by the high-speed airflow.<br \/>\nHigh-temperature double-door interlock environment has high sealingity<br \/>\nIf there is leakage, it will be easily detected. Installation must be done in one go to avoid rework.<br \/>\n6. Prohibited behaviors (very important)<br \/>\nDo not use water to rinse the efficient filter.<br \/>\nDo not knock or hit the filter frame.<br \/>\nDo not use non-original or non-matching efficient filters.<br \/>\nDo not place any items on the filter.<br \/>\nDo not disassemble or assemble without power off.<\/p>","protected":false},"excerpt":{"rendered":"<p>Below is a detailed list of the most crucial, easily overlooked, and directly affecting the lifespan and cleaning efficiency aspects when installing an efficient filter in a manual double-door or shower room, specifically for this purpose. It is practical and can be directly followed: 1. Pre-installation precautions Make sure the direction is absolutely correct and [&hellip;]<\/p>","protected":false},"author":3,"featured_media":4983,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[92],"tags":[],"class_list":["post-5292","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-technology"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/posts\/5292","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/comments?post=5292"}],"version-history":[{"count":1,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/posts\/5292\/revisions"}],"predecessor-version":[{"id":5293,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/posts\/5292\/revisions\/5293"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/media\/4983"}],"wp:attachment":[{"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/media?parent=5292"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/categories?post=5292"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bacintl.com\/ar\/wp-json\/wp\/v2\/tags?post=5292"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}